Skip to content
FOZ ONE
Technology

One motor platform, four bodies around it.

A 135,000 rpm motor, a cyclone array sized to the model, and a sealed path from the floor head to the exhaust. Nothing here is a coating or a claim.

Inside the machine

Air goes in dirty at one end and comes out clean at the other.

Three stages, in this order, every time. Nothing here is a coating or a claim — it is the path the air actually takes.

01Stage

The head lifts it

A soft roller floats over hard floors and the stiff row digs into pile. Both turn on the same motor, so the head never stalls halfway across a rug.

22 mm
carpet pile cleared
02Stage

The cyclones throw it out

Air enters eighteen cones at 92 km/h. Anything heavier than air is thrown to the wall and drops into the bin instead of reaching the filter.

92 km/h
air speed in the cones
03Stage

The seal keeps it in

Nine gaskets and a HEPA 14 cartridge. What leaves the machine is measurably cleaner than the air that went in.

99.995%
captured at 0.3 µm
Side by side

What actually differs

Same motor platform, same sealed body. These are the lines that change.

Specification comparison across the four FOZ ONE models
ModelF1 GlideRM 899F3 SurgeRM 1,399F5 Vortex ProRM 2,199R2 OrbitRM 2,799
Suction120 AW180 AW240 AW4,200 Pa
Runtime45 min60 min75 min180 min
Weight1.7 kg1.9 kg2.1 kg
Bin0.5 L0.65 L0.8 L0.35 L
FiltrationHEPA 12HEPA 13HEPA 14HEPA 13
Anti-tangle brush
Dust sensing
Laser floor light
Mops
Empties itself
Spare battery in box
Warranty, registered3 years3 years3 years3 years